Air Filter Element Material
|Packaging:||PP bag & Internal Box|
|Productivity:||500PCS PER DAY|
|Place of Origin:||CHINA|
|Supply Ability:||500pcs per day|
Model No.: LFA060
Filter Element Characteristics
1. The air permeability of the precision Filter Element: the filter element adopts a strong hydrophobic and oleophobic fiber filter material, and at the same time adopts a stainless steel support net with good permeability and high strength to reduce the resistance caused by passing.
2. High efficiency of precision air filter element: The filter element uses precision sodium borosilicate glass fiber, filter paper and non-woven fabric, which can effectively prevent oil and water from being entrained by high-speed airflow. The fine oil droplets gather at the lower end of the compressed air filter element and discharge to the bottom of the filter container.
3. The air tightness of the precision fiber glass filter element: The connection point of the filter element and the filter housing adopts a reliable perfluorinated sealing ring to ensure that the air flow is not short-circuited and prevent impurities from directly entering the downstream without passing through the filter element.
4. Anti-corrosion of precision filter element: The filter element adopts anti-corrosion PA+GF end cap, under 1.8Mpa pressure, it can withstand high temperature of 240℃ without deformation and -20℃ without embrittlement. The double-layer stainless steel support net can prevent general acid and alkali chemical corrosion and can be used in harsh working conditions.
The main principle of the filter element is also the main principle of the filter. It is the purification equipment needed to purify the original ecological resources and the reuse of resources. The filter element is generally mainly used in filtration industries such as oil filtration, water filtration, and air filtration.
Removal of a small amount of impurities in the filter medium can protect the normal operation of the equipment or the cleanness of the air. When the fluid passes through the filter element with a certain precision in the filter, its impurities are blocked, and the clean fluid flows out through the filter element.
The filter element can purify the contaminated medium to achieve the clean state required for production and have a certain degree of cleanliness. The filter element is used in a wide range, such as steel smelting, power production, food and beverage, etc.
① Long spanlife under rate working conditions.
② Filtration performance up to 0.01micron and residual oil up to 0.001mg/m³ in according with ISO8573.1-2010 standard.
③ Low pressure drop, saving energy and cost for ownership.
④ Colorful element top cap, Spin-on for filter, easy operate and maintain.
Element Technical Specification
PF AO AA AX ACS AR AAR Particle removal (ISO12500-3) 5μm 1μm 0.01μm 0.01μm - 1μm 0.01μm Outlet oil aerosol concentration (ISO12500-1) 5mg/m³ 0.6mg/m³ <0.01mg/m³ <0.001mg/m³ <0.004mg/m³ - - Filtration performance of Particle (ISO12500-3) - 99.999+% 99.999+% 99.999+% 99.999+% 99.999+% 99.999+% Filtration performance of oil (ISO12500-1) 50% 80+% 99.9+% 99.99+% - - - Element spanlife 6000 hours 6000 hours 6000 hours 6000 hours 2000-3000 hours 4000-6000 hours 4000-6000 hours Precede with Before refrigerated air dryer after air dryer after AO after AA before AX after desiccant dryer after AR
Detail of Element
Hongrijia Depurate Facility Science & Technology Co.,Ltd.
Hongrijia Depurate Facility Science & Technology Co., Ltd. was founded in 1998 and is located in Shenzhen, Guangdong Province. Own brand YUKA and has branches in Huizhou, Tianjin and New Delhi, India, with a total production area of 15,000 square meters.
As a well-known manufacturer of compressed air drying, filtering and separation equipment in China, YUKA is focusing on R&D, production and sales of high-quality compressed air treatment and purification equipment, breaking the situation that China's compressed air filtration and separation technology is occupied by foreign markets. Provide high-quality products and services for industries that need compressed air as a source of power.
Our product types include compressed air refrigeration air dryer (dew point: 2℃~10℃), adsorption air dryer (dew point: -20℃~ -70℃), high-efficiency compressed air filter, cyclone gas-water separator, oil and gas separator , compressor air filter, oil filter, alternative Filter Element, floating ball automatic drain and accessories.
The star products are HLX series drying and filtering in one refrigeration dryer, GHF series 30bar high efficiency compressed air filter, G-BHL series 60bar stainless steel compressed air filter, HF series and YD series compressed air filters, etc. .Products have obtained a number of national invention patents, utility model patents and appearance design patents. Widely used in military, medical, semiconductor, optoelectronics, nuclear power plants, aerospace, food, beverages, spray coating, laser cutting, chemicals, metallurgy, transportation, electronics, machinery manufacturing, glass, cement, automation, medical treatment, semiconductors, nuclear power plants, aviation and other fields.
YUKA always adheres to quality as the core, and continues to provide customers with high-quality pre-sales, sales and after-sales services, and provides clean, dry, high-quality compressed air for industrial applications, reduces energy consumption, saves production costs, and improves product qualification rate.
- Company Name: Hongrijia Depurate Facility Science & Technology Co.,Ltd.
- Representative: Liu Bai Fan
- Product/Service: Compressed Air Dryer , Compressed Air Filter , Air Water Separator , Condensate Auto Drain , Air Filter Element , Differential Pressure Gauge
- Capital (Million US $): US$ 5 Millions
- Year Established: 1998
- Total Annual Sales Volume (Million US $): US$50 Million - US$100 Million
- Export Percentage: 21% - 30%
- Total Annual Purchase Volume (Million US $): US$10 Million - US$50 Million
- No. of Production Lines: 10
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: 6th Floor, Block H, No. 8, Qinglan 1st Road, Pingshan District, Shenzhen
- Contact Person: Ms. YUKA
- Tel: +86-0755-28686438
Premium Related Products